Member ID:
  Password:
  Free Registration
  

 

 

 
  Home > Product > Sheet membrane MBR > Sheet Membrane element
 
 
 
 
  Sheet Membrane element   Leave Message
 
 
 
 

 

Plate type membrane elements are placed vertically in the aerobic bio-reaction tank, permeate and small molecules (such as salt) pass through the membrane via the crossflow filtration process by applying partial vacuum. The activated sludge mixted liquor of a certain concentration flows upward parallel to the panel by continuously aeration.  Through this mechanism,  the activated sludge will not easily accumulated on the surface of the menbrane, and the flux can be stably maintinaed for a long time.

 

 

Specifications as below:

             

Membrane Material

PVDF

Sheet Membrane Type

MBR100

MBR200

Pure Water Flux (Lmh/0.1bar)

1900

200

MW of Marker (Dalton)

Pore size: 0.7~0.9µm

20K PEG

Nominal Marker Rejection (%)

96

Total membrane surface(m2/panel)

0.8

Dimension(mm)

490×1000×6

Weight (Kg)

3.2

BOD (mg/L)

<2~5

pH

2~11

Effluent tubidity (NTU)

<0.2

Effluent SS (mg/L)

<2

 
 
 
Spiral membrane element

Sheet membrane MBR
      Sheet Membrane element
      Sheet MBR Module

membrane housing

Membrane housing
      Ceramic membrane housing
      2.5 inch membrane housing
      4.0 inch membrane housing
      8.0 inch membrane housing
      8.3 inch membrane housing
      3-A membrane housings
      E-coat membrane housing
      OEM system & Accessories

Cartridge Filter housings
      TCH: top closure housings
      MCH: Mid closure housings
      FMCH: Special design
      Offset: swing bolt design

Bag filter vessels
      Single Bag Filter(V-clamp)
      Single Bag Filter(Swing bolt)
      Multi-Bag Vessel

 
 
 
   ZJ-ICP: 浙ICP备07018902号